Tigerholm Tigerloop De‑aerator Part No: TON110I, TL6000

Genuine Tigerloop de-aerator by Tigerholm of Sweden

  • Effectively removes all gas/air bubbles from the oil system
  • Helps eliminate any oil pump and nozzle problems
  • Contains 1 x Tigerloop de-aerator

Read more product details …

Delivered: 1 - 2 working days (UK, Priority Delivery)

£59.99 £43.00 £35.83 exc VAT

In stock

Genuine Tigerloop de-aerator by Tigerholm of Sweden.

The Tigerloop de-aerator makes a one-pipe system possible for all types of oil heating installations helping to ensure environmental safety, cost-effectiveness and reliability.

Effective de-aeration

In an oil heating system using a Tigerloop De‑aerator, all oil passes through the automatic oil de-aerator, which effectively removes all gas/air bubbles from the system.

This eliminates oil pump and nozzle problems associated with gas/air in the oil.

Circulation using the Tigerloop De‑aerator

An oil pump delivers the same amount of oil, irrespective of what is actually needed for combustion. With a normal domestic burner, only 5% of the delivered oil is actually burned in combustion. The remaining 95% is transported by a two-pipe system back to the oil tank.

With a Tigerloop automatic oil de-aerator, no oil needs to be transported back to the tank.

The oil that is not burned in combustion is lead back to the Tigerloop where it is de-aerated again and again automatically. For this reason, only the amount of oil to be burned in combustion is sucked from the oil tank.

Minimise dirt/sludge

The oil flow in a one-pipe system is minimal due to the fact that only the amount of oil burned needs to be drawn up from the tank. For this reason, very little dirt/sludge is transported from the oil tank. This reduces the risk for clogged oil filters and burner nozzles. Filtration is more effective, soot buildup is reduced and filter life is extended.

Preheated oil

A one-pipe system with Tigerloop increases the oil pump capacity. Moreover, the oil is actually preheated to at least room temperature as friction in the oil pump generates heat. This eliminates problems with cold oil giving cleaner combustion and reduced oil consumption.

External mounting only, not permitted for indoor installation. It vents contaminated air into its surrounding environment, this could create explosion or health hazards in confined spaces and therefore must be fitted on the outside wall of any premises.


Part Number
TON110I, TL6000
Max flow rate
230 lph
Return flow rate
120 lph
Nozzle capacity
110 lph
Max dearating capacity
8 lph
Max operating temperature
60° C
Max pressure
-0.5 to +0.6 Bar
Connections sizes
All fittings 1/4" BSP
OFCERT License No

Manuals / Datasheets

You may also like…