HydroHALT by SEALUX 2.5m shower tray sealing kit
Sealux-N Sealant Adhesive is a neutral curing sanitary sealant adhesive tested and approved for installation with HydroHALT. Sealux-N is highly elastic and capable of tenacious adhesion to the red tinged siliconized surface of the HydroHALT strip.
Sealant Backer Cord is close celled polypropylene foam material supplied in two formats. It is supplied as an adhesive backed 6mm x 12mm foam that may be bonded to the sidewall by the plumber during installation of a shower tray or bath or as a 7mm round cord that may be retrospectively pressed into the ledge/wall joint after installation of a shower tray or bath.
Backer Rod Wheel is a 6mm stepped wheel that provide installers an easy means of setting the position of the adhesive backed backer rod on a shower tray or bath sidewall at 6mm below the ledge during installation of a shower tray or bath, or setting the backer rod depth at 5mm in a ledge/wall joint during retro-fit installations.
Adhesive Transfer Tape provides a means of bonding the logo side of the HydroHALT strip to a shower wall when installing HydroHALT over a shower tray of bath with an integrated upstand.
Smart Sealant Spatula is serrated on one side for spreading Sealux-N on the wall while the opposite side has two splayed corners, one of which is for rubbing up Sealux-N applied into the joint between the HydroHALT strip and side wall and the other of which is angled to provide a sealant fillet profile when HydroHALT is installed over a ledge.
Surface Cleaning Wipes are saturated in 100% isopropyl alcohol to ensure a clean surface for a strong Sealux-N sealant bond with the shower tray or bath side wall.
The Instruction Sheets provide clear guidance in respect of installing HydroHALT during installation of a new shower tray or bath, into an existing joint around a shower tray or bath or over a ledge.
How to: Install TileBud video demonstration
