Sealux-N Sealant Adhesive is a neutral curing sanitary sealant adhesive tested and approved for installation with HydroHALT. Sealux-N is highly elastic and capable of tenacious adhesion to the red-tinged siliconized surface of the HydroHALT strip.
Sealant Backer Cord is close celled polypropylene foam material supplied in two formats. It is supplied as an adhesive-backed 6mm x 12mm foam that may be bonded to the sidewall by the plumber during the installation of a shower tray or bath or as a 7mm round cord that may be retrospectively pressed into the ledge/wall joint after installation of a shower tray or bath.
Backer Rod Wheel is a 6mm stepped wheel that provides installers an easy means of setting the position of the adhesive-backed backer rod on a shower tray or bath sidewall at 6mm below the ledge during the installation of a shower tray or bath or setting the backer rod depth at 5mm in a ledge/wall joint during retro-fit installations.
Adhesive Transfer Tape provides a means of bonding the logo side of the HydroHALT strip to a shower wall when installing HydroHALT over a shower tray of bath with an integrated upstand.
Smart Sealant Spatula is serrated on one side for spreading Sealux-N on the wall while the opposite side has two splayed corners, one of which is for rubbing up Sealux-N applied into the joint between the HydroHALT strip and sidewall and the other of which is angled to provide a sealant fillet profile when HydroHALT is installed over a ledge.
Surface Cleaning Wipes are saturated in 100% isopropyl alcohol to ensure a clean surface for a strong Sealux-N sealant bond with the shower tray or bath sidewall. The Instruction Sheets provide clear guidance in respect of installing HydroHALT during the installation of a new shower tray or bath, into an existing joint around a shower tray or bath or over a ledge.
